GAM 3000
Artikel Nr. GAM 3000  

Amount:

GAM 3000 switching module for the GMH-series General description: The GAM3000 is an alarm or control output for the devices of the GMH-series with alarm functions. The GAM3000 is controlled via the serial interface of the GMH. The setting of the alarm/switching limits are carried out as usual via the GMH. You have a choice between 2 different switching modes:        - Alarm output:        Relay switches when the measuring value is no longer within the min-/max alarm values set or an error      state is displayed at the channel set (eg. Err.1, Err2., Err.7, Err.9, Err.11) - Control output:        In this case the min./max. values are not used as alarm points but as switching points for the on/off       switching point. In case of an error state being fulfilled the relay will switch in its preferred state 'off'. The various functions can be selected via an externally accessible miniature switch. Power supply: 220/240 V, 50/60 Hz Switching output: controlled socket, selector switch to select switching state normally-open or n-closed. Switching power: 10 A (ohmic load) GMH-connection: interface cable permanently connected to the device via cable, approx. 1 m,        additional power supply 10.5V/10mA permanently connected via cable, approx. 1 m with power        supply plug. Dimensions: (controller) 112 x 71 x 48 mm (H x W x D)

switching module for the devices of the GMH-series
The GAM3000 is an alarm or control output for the devices of the GMH-series with alarm functions.

The GAM3000 is controlled via the serial interface of the GMH.

The setting of the alarm/switching limits are carried out as usual via the GMH.

= instruction manual as *.pdf

deutsche Beschreibung

Your article:  GAM 3000; Article No. GAM 3000.  The total price of the article is: EUR   The net price of the article GAM 3000 is:  EUR 101.01
	^
Amount: