GKK 1100 case (340 x 275 x 83 mm) with foam lining for universal use

GKK 1300 large case (445 x 345 x 97 mm) with punched lining for one unit, probe, power supply, etc.

GKK 1420 large case (45 x 345 x 97 mm) with punched lining for two units, probe, power supply, etc.


GKK 3000 case (275 x 229 x 83 mm) with punched lining for all devices of the GMH-series

GKK 3100 case (275 x 229 x 83 mm) with foam lining for universal use

GKK 3500 large case (394 x 294 x 106 mm) with punched lining, for all devices of the GMH-series

GKK 3600 large case (394 x 294 x 106 mm) with punched lining for universal use

GMH 1300 Magnetic holder for suspension of devices with integrated suspension clip

GB 9V  9V spare battery, type IEC 6F22

GAK 9V Accu 9V 

GLG 1300 accu charger for charging of 2 9V accus at the same time

GNG 09 plug-in power supply (220/240 V, 50/60 Hz), 
           output voltage 12V stabilised, max 300 mA, with 2.5 mm jack connector

GNG 10 plug-in pwer supply, output voltage 10V/10mA, 
           suitable for devices with a 2.5 mm jack connector

GNG 10/3000 plug-in power supply, output voltage 10 V/10 mA,
           suitable for devices with power supply socket

GRS 3100 interface converter GMH <-> PC,
           for electrically isolated connection of a GMH-device to the RS232-interface 
           (25-pin DSub-plug) of your PC's. (Converter supplying from PC interface)
       
          Please note: DSub9 -> DSub25 has to be ordered separately if required - GSA 9S-25B)
       
GRS 3105 5-pint interface converter GMH <-> PC,
          for electrically isolated connection of up to 5 GMH-devices to the RS232-interface
          (9-pin DSub-Stecker) of your PC. (Converter current supply achieved via permanently connected
          power supply) (Unit delivered with 9-pin DSub-Extension cable and 5 connecting cables
          VEKA 3105 for connection of the GMH's to the converter) 

          Please note: DSub9 -> DSub25 has to be ordered separately if required - GSA 9S-25B)

VEKA 3105 spare connecting cable GMH <-> GRS 3105

GSA 25X-9B connection adapter        
          (25-pin DSub-plug <=> 9-pin DSub-socket)

GSA 9S-25 B connection adapter
         (9-pin DSub-plug <=> 25-pin DSub-socket)

GAM 3000 switching module for the GMH-series

General description:

The GAM3000 is an alarm or control output for the devices of the GMH-series with alarm functions. The GAM3000 is controlled via the serial interface of the GMH. The setting of the alarm/switching limits are carried out as usual via the GMH. You have a choice between 2 different switching modes:
      
- Alarm output:  
     Relay switches when the measuring value is no longer within the min-/max alarm values set or an error
     state is displayed at the channel set (eg. Err.1, Err2., Err.7, Err.9, Err.11)

- Control output:  
     In this case the min./max. values are not used as alarm points but as switching points for the on/off 
     switching point. In case of an error state being fulfilled the relay will switch in its preferred state 'off'.

The various functions can be selected via an externally accessible miniature switch.

Power supply: 220/240 V, 50/60 Hz

Switching output: controlled socket, selector switch to select switching state normally-open or n-closed.

Switching power: 10 A (ohmic load)

GMH-connection: interface cable permanently connected to the device via cable, approx. 1 m,
       additional power supply 10.5V/10mA permanently connected via cable, approx. 1 m with power
       supply plug.

Dimensions: (controller) 112 x 71 x 48 mm (H x W x D)

The total price of the article is: EUR
 

The net price of the article GB 9V is:  EUR 1.68