GPRT 1400 AN
Artikel Nr. GPRT 1400 AN  

Amount:

DIGITAL-PH-/MV/Thermometer Device ready for use incl. pH-electrode GE 100, buffer capsules pH 4 and pH 7, two 100 ml-plastic bottles as  well as temperature probes GTF 1400. Battery / mains operation analog output: 1 mV/digit ATC = Automatic Temperature-Compensation	GPRT 1400 AN
GPRT 1400 AN - device incl. probe GPRT 1400 AN GL - device without probe

Specification:

Measuring range:
    position 1 (pH): 0.00 to 14.00 pH
    position 2 (°C): -20.0 to + 110.0°C
    position 3 (mV): -1999 to +1999 mV

Resolution:
   0.01 pH, 0,1°C or 1 mV

Accuracy (device):
    (pH): +0.02 pH ± 1 digit
    (°C): +0,5°C ± 1 digit (range -20 to + 110°C)
    (mV): ± 0,2% of meas. values ± 1 digit

Analog output: mV/digit, 
        connection via 3.5 mm diameter jack connector (suitable jack connector included)

Input resistance: 10¹² Ohm

Working temperature: 0 to 45°C 

Nominal temperature: 25°C 

Power supply: 9 V battery type IEC 6 F 22 (included)
         as well as additional power supply connector socket 2.5 mm diameter.

Battery service life: approx.100 operating hours

Low battery warning: "BAT" 

Display: 3 1/2 digit LCD, approx. 13 mm high

Dimensions: approx. 150 x 86 x 30 mm (H x W x D);
         Impact resistant ABS housing with integrated pop-up clip for table top 
        or suspended use, electrode clipped on at the side.

Weight: approx. 330 g (ready for use)

pH-Electrode: combined measuring and reference electrode type GE 014 with 
        refillable 3 mol- KCl electrolyte 0-14 pH, 0-80 °C
        Attention: The pH-electrode does not allow for redox-measurements! 
                    Please order redox electrode GE 105 separately, if required
    
Temperature probe Type GTF 1400AN: silicon temperature probe (KTY 11-6), 
        electr. insulated in V4A-pipe 5 mm diameter, approx. 100 mm length, 
        approx. 1m silicon cable with 3.5 mm diameter jack connector for connection 
        to front-side socket. The instrument is calibrated to cincluded GTF1400AN. If probe is replaced a new calibration is necessary.

Calibration: 3 turning knobs for
        1. Temperature compensation automatically when probe is plugged in)
        2. pH 7-value        
        3. pH X-value (e.g. pH  4.0, 10.0, or 12.0) 

GPRT 1400 AN GL   loose device
GTF 1400 AN           spare temperature probe      

DIGITAL-PH-/MV/Thermometer
Device ready for use incl. pH-electrode GE 100, buffer capsules pH 4 and pH 7, two 100 ml-plastic bottles complete with temperature probes GTF 1400 ATC, 1mV/Digit

Please order works calibration certificate separately:

• WPP10

= instruction manual GMH 3530 as *.pdf

deutsche Beschreibung

Your article:  GPRT 1400 AN; Article No. GPRT 1400 AN.  The total price of the article is: EUR   The net price of the article GPRT 1400 AN is:  EUR 166.39
	^
Amount: